Printing Sticker Wrap

We have many customers asking to print stickers for purpose of wrapping about an object, be it acrylic or wood. We want to share some thoughts on how best to design the file.

1. Know the size of the object to wrap

Let's say your wooden block is 100cm x 100cm. We will need to prepare a print file that is slightly bigger to exceed your wooden block and then to trim off the edges. Also if there is more than one face of your object to wrap, we will need to design excess to wrap around to the other face of the object.

2. Visualize how the design will flow from one side of the object to another

We recommend using one single tone background for the design the flow nicely from one face of the block to another. Or if your design has a continuous pattern, that works well also.

3. Take a picture for us to check

Always give us a picture of the object to install. Don't leave it till after the printing is done. As we are then able to check if the dimensions provided in your artwork is accurate and good for printing and installation.